|
|
|
Knipex 71 72 460 7172460, 7172-460
Bolt Cutters 18-1/2" (460mm)
Knipex 71 72 460 Bolt Cutters cut through pre-stressing steel and
tempered steel wire up to a hardness of 48 HRC and are extremely hard-wearing.
The long life results from the use of high performance Chrome Vanadium steel
for the blades. Special attention was also paid to the forged joint.
Precision cutting edges additionally induction hardened, 62 HRC. Knipex 71
72 460 offers good
access due to very flat construction of head and joint areas. Forged on stopper
with elasatomer insert cushions the cutting stroke comfortably. Sturdy non-slip
two-colour dual component handles. Precise adjustment (12 positions) of the
blades by eccentric bolts. Knipex 71 72 460 provides high cutting performance with minimum effort due to
optimum coordination of the cutting edge angle and transmission ratio.
Replaceable, bolted cutter head. Made in Germany
Knipex 71 72 460 s Cutting capacity:
8mm 19 HRC, 6mm 40 HRC,
5mm 48 HRC
Click here for more information on
Knipex 71 72 460 Bolt Cutters
Knipex 71 72 460, 7172460, 7172-460 Bolt Cutters. |
| DESCRIPTION |
OVERALL
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 71 72 460
Bolt Cutters |
18-1/2" |
KN 7172 460 |
$153.26 |
$114.10 |
|
|
|
Knipex 71 72 610 7172610, 7172-610
Bolt Cutters 24" (610mm)
Knipex 71 72 610 Bolt Cutters cut through pre-stressing steel and
tempered steel wire up to a hardness of 48 HRC and are extremely hard-wearing.
The long life results from the use of high performance Chrome Vanadium steel
for the blades. Special attention was also paid to the forged joint.
Precision cutting edges additionally induction hardened, 62 HRC. Knipex 71
72 610 offers good
access due to very flat construction of head and joint areas. Forged on stopper
with elasatomer insert cushions the cutting stroke comfortably. Sturdy non-slip
two-colour dual component handles. Precise adjustment (12 positions) of the
blades by eccentric bolts. Knipex 71 72 610 provides high cutting performance with minimum effort due to
optimum coordination of the cutting edge angle and transmission ratio.
Replaceable, bolted cutter head. Made in Germany.
Knipex 71 72 610 s Cutting capacity:
9mm 19 HRC, 8mm 40 HRC,
7mm 48 HRC
Click here for more information on
Knipex 71 72 610 Bolt Cutters
Knipex 71 72 610, 7172610, 7172-610 Bolt Cutters are made in Germany. |
| DESCRIPTION |
OVERALL
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 71 72 610
Bolt Cutters |
24" |
KN 7172 610 |
$178.80 |
$133.10 |
|
|
|
Knipex 71 72 760 7172760, 7172-760
Bolt Cutters 30" (760mm)
Knipex 71 72 760 Bolt Cutters cut through pre-stressing steel and
tempered steel wire up to a hardness of 48 HRC and are extremely hard-wearing.
The long life results from the use of high performance Chrome Vanadium steel
for the blades. Special attention was also paid to the forged joint.
Precision cutting edges additionally induction hardened, 62 HRC. Knipex 71
72 760 offers good
access due to very flat construction of head and joint areas. Forged on stopper
with elasatomer insert cushions the cutting stroke comfortably. Sturdy non-slip
two-colour dual component handles. Precise adjustment (12 positions) of the
blades by eccentric bolts. Knipex 71 72 760 provides high cutting performance with minimum effort due to
optimum coordination of the cutting edge angle and transmission ratio.
Replaceable, bolted cutter head. Made in Germany.
Knipex 71 72 760 s Cutting capacity:
11mm 19 HRC, 9mm 40 HRC,
8mm 48 HRC
Click here for more information on
Knipex 71 72 760 Bolt Cutters
Knipex 71 72 760, 7172760, 7172-760 Bolt Cutters are made in Germany.
|
| DESCRIPTION |
OVERALL
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 71 72 760
Bolt Cutters |
30" |
KN 7172 760 |
$234.14 |
$194.10 |
|
|
|
Knipex 71 72 910 7172910, 7172-910
Bolt Cutters 35-3/4" (910mm)
Knipex 71 72 910 Bolt Cutters cut through pre-stressing steel and
tempered steel wire up to a hardness of 48 HRC and are extremely hard-wearing.
The long life results from the use of high performance Chrome Vanadium steel
for the blades. Special attention was also paid to the forged joint.
Precision cutting edges additionally induction hardened, 62 HRC. Knipex 71
72 910 offers good
access due to very flat construction of head and joint areas. Forged on stopper
with elasatomer insert cushions the cutting stroke comfortably. Sturdy non-slip
two-colour dual component handles. Precise adjustment (12 positions) of the
blades by eccentric bolts. Knipex 71 72 910 provides high cutting performance with minimum effort due to
optimum coordination of the cutting edge angle and transmission ratio.
Replaceable, bolted cutter head. Made in Germany.
Knipex 71 72 910 s Cutting capacity:
13mm 19 HRC, 10mm 40 HRC,
9mm 48 HRC
Click here for more information on
Knipex 71 72 910 Bolt Cutters
Knipex 71 72 910, 7172910, 7172-910 Bolt Cutters are made in Germany.
|
| DESCRIPTION |
OVERALL
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 71 72 910
Bolt Cutters |
35-3/4" |
KN 7172 910 |
$329.92 |
$249.40 |
|
|
|
Knipex 71 82 950 7182950, 7182-950
Concrete Mesh Cutters 37-1/2" (950mm)
(Rebar Cutters)
Knipex 71 82 950 Concrete Mesh Cutter cuts through pre-stressing steel and
tempered steel wire up to a hardness of 48 HRC and are extremely hard-wearing.
The long life results from the use of high performance Chrome Vanadium steel
for the blades. Special attention was also paid to the forged joint.
Precision cutting edges additionally induction hardened, 62 HRC. Knipex 71 82 950 offers good
access due to very flat construction of head and joint areas. Forged on stopper
with elasatomer insert cushions the cutting stroke comfortably. Sturdy non-slip
two-colour dual component handles. Precise adjustment (12 positions) of the
blades by eccentric bolts. Knipex 71 82 950 provides high cutting performance with minimum effort due to
optimum coordination of the cutting edge angle and transmission ratio.
Replaceable, bolted cutter head. Made in Germany.
Knipex 71 82 950 s Cutting capacity:
11mm 19 HRC, 9mm 40 HRC,
6mm 48 HRC
Click here for more information on
Knipex 71 82 950 Rebar Cutters
Knipex 71 82 950, 7182950, 7182-950 Rebar Cutters are made in Germany.
|
| DESCRIPTION |
OVERALL
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 71 82 950
Rebar Cutters |
37-1/2" |
KN 7182 950 |
$229.82 |
$149.40 |
|
|
Knipex 71 01 200 7101200, 7101-200
Bolt Cutters-CoBolt Compact Bolt Cutters
Knipex 71 01 200 Bolt Cutters with Lever Action provide exceptional cutting performance with little effort for piano wire, soft solid wire, bolts, nails, rivets and screws.
Chrome Vanadium electric oil hardened steel and inductive hardened edges provide 64HRc edge hardness. Made in Germany.
Knipex 71 01 200 CoBolt (Compact Bolt Cutters);
Cuts 6mm Soft Wire, 5.2mm Nails and Medium Hard Wire, 4mm Hard Wire and 3.6mm
Piano Wire.
Knipex 71 01 200, 7101200, 7101-200 CoBolt Compact Bolt Cutters.
Click here for more information |
| DESCRIPTION |
OVERALL
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 71 01 200
Bolt Cutter 8" |
8" |
KN 7101 200 |
$69.00 |
$38.50 | |
|
Knipex 71 21 200 7121200, 7121-200
Bolt Cutters-CoBolt (Compact Bolt Cutters)
Head Angled 20° and Single Sided Joint Bar
New from Knipex 7121200 Bolt Cutters are similar to
7101200 20° angled with single sided joint bar and diagonal cutting
edge for flush cutting; with space for gripping. Lever Action provides exceptional cutting performance with little effort for piano wire, soft solid wire, bolts, nails,
chain link fence, rivets and screws. Vanadium electric oil hardened steel and inductive hardened edges provide 64HRc edge hardness. Made in Germany.
Knipex 71 21 200 CoBolt Compact Bolt Cutters;
Cuts 6mm Soft Wire, 5.2mm Nails and Medium Hard Wire, 4mm Hard Wire and 3.6mm
Piano Wire.
Knipex 71 21 200, 7121200, 7121-200 CoBolt
Compact Bolt Cutters
Click here for more information on
Knipex 71 21 200 Bolt Cutters |
| DESCRIPTION |
OVERALL
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 71 21 200
Bolt Cutter w/ Angled Head |
8" |
KN 7121 200 |
$73.06 |
$47.20 | |
|
Knipex 71 02 200,
7102200, 7102-200
Bolt Cutters
With Comfort Grip
Knipex 7102200 Bolt Cutters are the same as
7101200 with the addition of Comfort Grip Handles.
These ergonomically designed bolt cutters brings an
enhanced level of comfort and gripping power.
Lever Action provides exceptional cutting performance with little effort for piano wire, soft solid wire, bolts, nails, rivets and screws.
Chrome Vanadium electric oil hardened steel and inductive hardened edges provide 64HRc edge hardness. hardness. Made in Germany.
Knipex 71 02 200 CoBolt Compact Bolt Cutters;
Cuts
6mm Soft Wire, 5.2mm Nails and Medium Hard Wire, 4mm Hard Wire and 3.6mm
Piano Wire.
Knipex 71 02 200, 7102200, 7102-200 CoBolt Compact Bolt
Cutters.
Click here fror more information |
| DESCRIPTION |
OVERALL
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 71 02 200
Bolt Cutter 8" Comfort
Grip |
8" |
KN 7102 200 |
$75.10 |
$43.10 | |
|
Knipex 71 12 200
Bolt Cutters With Spring
Return
Knipex 7112200 Bolt Cutters are the same as 7102200 with the addition of return spring and lock. Lever Action provides exceptional cutting performance with little effort for piano wire, soft solid wire, bolts, nails, rivets and screws.
Chrome Vanadium electric oil hardened steel and inductive hardened edges provide 64HRc edge hardness. Includes opening spring and
stirrup lock.
Knipex 71 12 200 Bolt Cutters;
Cuts 6mm Soft Wire, 5.2mm Nails and Medium Hard Wire, 4mm Hard Wire and 3.6mm
Piano Wire.
Made in Germany.
Click here for more information
Replaces
KN7111-200 |
| DESCRIPTION |
OVERALL
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 71 12 200
Bolt Cutter 8"
with Spring |
8" |
KN 7112 200 |
$79.16 |
$45.40 | |
|
Knipex 71 22 200
Bolt Cutters
Head Angled 20° and Single Sided Joint Bar
Return Spring & Comfort Grips
Knipex 7122200 Bolt Cutters are the same as 7121200
with the addition of return spring, handle lock and dual component
comfort grips.
20° angled with single sided joint bar and diagonal cutting
edge for flush cutting; with space for gripping.
Lever Action provides exceptional cutting performance with little effort for piano wire, soft solid wire, bolts, nails,
chain link fence, rivets and screws. Vanadium electric oil hardened steel and inductive hardened edges provide 64HRc edge hardness. Knipex 71 22 200 Bolt Cutters;
Cuts 6mm Soft Wire, 5.2mm Nails and Medium Hard Wire, 4mm Hard Wire and 3.6mm
Piano Wire.
Made in Germany. Knipex 71 22 200 CoBolt Cutters
Click here for more information |
| DESCRIPTION |
OVERALL
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 71 22 200
Bolt Cutter with Angled Head, Return Spring & Comfort Grips |
8" |
KN 7122 200 |
$87.82 |
$62.10 | |
|
Knipex 71 31 200
Bolt Cutters With Notch
Knipex 7131200 Bolt Cutters with Lever Action provide exceptional cutting performance with little effort for piano wire, soft solid wire, bolts, nails,
chain link fence, rivets and screws. Vanadium electric oil hardened steel and inductive hardened edges provide 64HRc edge hardness.
Recess (notch) in the blade allows for easier cutting of thicker wires. Knipex 71 31 200 Bolt Cutters;
Cuts
6mm Soft Wire, 5.2mm Nails and Medium Hard Wire, 4mm Hard Wire and 3.6mm
Piano Wire.
Made in Germany. Knipex 71 31 200 CoBolt Cutters
Click here for more information |
| DESCRIPTION |
OVERALL
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 71 31 200
Bolt Cutter 8"
with Notch |
8" |
KN 7131 200 |
$77.64 |
$44.00 | |
|
Knipex 71 41 200
Bolt Cutters With Notch
Head Angled 20° and Single Sided Joint Bar
Knipex 7141200 Bolt Cutters are similar to
7131200
20° angled with single sided joint bar and diagonal cutting
edge for flush cutting; with space for gripping. Lever Action provides exceptional cutting performance with little effort for piano wire, soft solid wire, bolts, nails,
chain link fence, rivets and screws. Vanadium electric oil hardened steel and inductive hardened edges provide 64HRc edge hardness.
Recess (notch) in the blade allows for easier cutting of thicker wires. Knipex 71 41 200 Bolt Cutters;
Cuts
6mm Soft Wire, 5.2mm Nails and Medium Hard Wire, 4mm Hard Wire and 3.6mm
Piano Wire.
Made in Germany. Knipex 71 41 200 CoBolt Cutters
Click here for more information |
| DESCRIPTION |
OVERALL
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 71 41 200
Bolt Cutter w/ Notch, Angled Head and flat cutting surface |
8" |
KN 7141 200 |
$86.00 |
$59.00 | |
|
Knipex 71 32 200
Bolt Cutters
With Notch
Spring Return and Comfort Grip
Knipex 7132200 Bolt Cutters are the same as 7131200 with the addition return sping, handle
lock and dual component comfort grips. Lever Action provides exceptional cutting performance with little effort for piano wire, soft solid wire, bolts, nails,
chain link fence, rivets and screws. Vanadium electric oil hardened steel and inductive hardened edges provide 64HRc edge hardness.
Recess (notch) in the blade allows for easier cutting of thicker wires. Knipex 71 32 200 Bolt cutters;
Cuts
6mm Soft Wire, 5.2mm Nails and Medium Hard Wire, 4mm Hard Wire and 3.6mm
Piano Wire.
Made in Germany. Knipex 71 32 200 Bolt Cutters
Click here for more information |
| DESCRIPTION |
OVERALL
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 71 32 200
Bolt Cutter with Notch, Return Spring & Comfort Grips |
8" |
KN 7132 200 |
$81.70 |
$53.10 | |
|
Knipex 61 01 200
Bolt End Cutting Nippers
Knipex 6101200 Better handling, greater capacity
and lower hand force required compared to conventional bolt end cutting
nippers. Cuts bolts, nails, rivets, piano wire
and soft wire. Particular high cutting capacity with minimum effort due
to optimum transmission ratio. Vanadium electric oil hardened steel and
inductive hardened edges provide 64HRc edge hardness.
Knipex 61 01 200 Bolt End Cutting Nippers;
Cuts 1mm to
6mm Soft Wire, 4mm Nails and Medium Hard Wire, 3.5mm Hard Wire and 3mm Piano
Wire.
Made in Germany.
Click here for more information |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 61 01 200
Bolt End Cutters 8" |
8" |
KN 6101 200 |
$78.30 |
$49.40 | |
|
Knipex 67 01 200
6701200, 6701-200
High Leverage End Cutters
Knipex 67 01 200 Cuts soft, hard and piano wire.
High cutting capacity with little effort due to optimum coordination of
cutting edge angle and transmission ratio. Cutting edges
additionally induction hardened, cutting edge hardness approx. 64 HRC.
Chrome Vanadium electric steel, oil hardened and tempered.
Knipex 67 01 200 High Leverage End Cutters
Cuts 5mm Soft Copper Wire, 3.8mm Nails
and Medium Hard Wire, 3mm Hard
Wire, 2.5mm Piano Wire. Made in Germany. Knipex 67 01 200, 6701200.
Click for
more sizes & information |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 67 01 200
High Leverage
End Cutters 8" |
8" |
KN 6701 200 |
$54.98 |
$39.88 | |
|
|
