|
|
Knipex® Cable Shears
For cutting copper and aluminum
cables, single and multiple wire. Not suitable for steel wire and
hard drawn copper conductors. Precision ground, sharp hardened blades of forged Vanadium steel,
oil-hardened and tempered. Clean and smooth cut without crushing and
deformation. Easy cutting with one hand operation. Adjustable screw
joint, self-locking. Universal use for cutting, dismantling and
stripping. Made in Germany. |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR COST |
|
Cable Shears |
6 1/2" |
KN9511-165 |
$36.64 |
$29.20 | |
|
Knipex Comfort® Cable Shears
Knipex cable shears are now further enhanced with a new generation of
ergonomically designed handles. They offer a level of comfort and cutting
power that is unmatched with little user effort. The new two component handles feature a hard red 'movement zone' which reduces friction as the hand slides along the cable shears, along with a soft blue 'gripping zone', which permits high gripping force without slipping.
Precision ground, sharp hardened blades of forged Vanadium steel for copper and
aluminum cables. No crushing or deformation of cables. Universal use for cutting, dismantling and stripping.
Made in Germany. Not suitable for steel wire and hard drawn copper conductors. |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR COST |
|
Cable Shears w/Comfort Grips |
6 1/2" |
KN9512-165 |
$41.18 |
$33.10 | |
|
Knipex® Cable Shears
1000V
For cutting copper and aluminum
cables, single and multiple wire. Not suitable for steel wire and
hard drawn copper conductors. Precision ground, sharp hardened blades of forged Vanadium steel,
oil-hardened and tempered. Clean and smooth cut without crushing and
deformation. Easy cutting with one hand operation. Adjustable screw
joint, self-locking. Universal use for cutting, dismantling and
stripping.
Insulated with two-colour dual component handles. 1000V rated VDE-tested,
IEC 60900, DIN EN 60900. Made in Germany |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR COST |
|
Cable Shears
1000V |
6 1/2" |
KN9518-165 |
$42.94 |
$34.34 | |
|
Knipex Comfort® Cable Shears
1000V Chrome Plated
For cutting copper and aluminum cables, single and multiple wire. Not suitable for steel wire and hard drawn copper conductors. Precision ground, sharp hardened blades of forged Vanadium steel, oil-hardened and tempered. Clean and smooth cut without crushing and deformation. Easy cutting with one hand operation. Adjustable screw joint, self-locking. Universal use for cutting, dismantling and stripping. Insulated with two-colour dual component handles. 1000V rated VDE-tested, IEC 60900, DIN EN 60900. Made in Germany. |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR COST |
Cable Shears
1000V Chrome Plated |
6 1/2" |
KN9516-165 |
$62.16 |
$47.86 | |
|
Knipex® Double Cable Shears
For cutting copper and aluminum
cables, single and multiple wire. Not suitable for steel wire and
hard drawn copper conductors. Precision ground, sharp hardened blades of forged Vanadium steel,
oil-hardened and tempered. Clean and smooth cut without crushing and
deformation. Easy cutting with one hand operation. Initial and final
cut (upper and lower blade) allows cables of up to 20mm diameter to be
cut. Low hand force required due to favorable lever ratio and new blade
geometry. Adjustable screw
joint, self-locking. Made in Germany. |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR COST |
|
Double Cable Shears |
8" |
KN9511-200 |
$62.08 |
$49.30 | |
|
Knipex Comfort® Double Cable Shears
For cutting copper and aluminum
cables, single and multiple wire. Not suitable for steel wire and
hard drawn copper conductors. Precision ground, sharp hardened blades of forged Vanadium steel,
oil-hardened and tempered. Clean and smooth cut without crushing and
deformation. Easy cutting with one hand operation. Initial and final
cut (upper and lower blade) allows cables of up to 20mm diameter to be
cut. Low hand force required due to favorable lever ratio and new blade
geometry. Adjustable screw
joint, self-locking. Made in Germany. |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR COST |
|
Double Cable Shears
w/Comfort Grip |
8" |
KN9512-200 |
$71.40 |
$56.44 | |
|
Knipex® Double Cable Shears
1000V
For cutting copper and aluminum
cables, single and multiple wire. Not suitable for steel wire and
hard drawn copper conductors. Precision ground, sharp hardened blades of forged Vanadium steel,
oil-hardened and tempered. Clean and smooth cut without crushing and
deformation. Easy cutting with one hand operation. Initial and final
cut (upper and lower blade) allows cables of up to 20mm diameter to be
cut. Low hand force required due to favorable lever ratio and new blade
geometry. Adjustable screw
joint, self-locking. Insulated with two-colour dual component
handles. 1000V rated VDE-tested, IEC 60900, DIN EN 60900. Made in
Germany. |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR COST |
|
Double Cable Shears
1000V |
8" |
KN9518-200 |
$59.70 |
$52.10 | |
|
Knipex® Double Cable Shears
1000V Chrome Plated
For cutting copper and aluminum
cables, single and multiple wire. Not suitable for steel wire and
hard drawn copper conductors. Precision ground, sharp hardened blades of forged Vanadium steel,
oil-hardened and tempered. Clean and smooth cut without crushing and
deformation. Easy cutting with one hand operation. Initial and final
cut (upper and lower blade) allows cables of up to 20mm diameter to be
cut. Low hand force required due to favorable lever ratio and new blade
geometry. Adjustable screw
joint, self-locking. Insulated with two-colour dual component handles. 1000V rated VDE-tested, IEC 60900, DIN EN 60900. Made in Germany. |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR COST |
Double Cable Shears
1000V Chrome Plated |
8" |
KN9516-200 |
$77.68 |
$62.14 | |
|
Knipex® Double Cable Shears
1000V Chrome Plated Red Dip
For cutting copper and aluminum
cables, single and multiple wire. Not suitable for steel wire and
hard drawn copper conductors. Precision ground, sharp hardened blades of forged Vanadium steel,
oil-hardened and tempered. Clean and smooth cut without crushing and
deformation. Easy cutting with one hand operation. Initial and final
cut (upper and lower blade) allows cables of up to 20mm diameter to be
cut. Low hand force required due to favorable lever ratio and new blade
geometry. Adjustable screw
joint, self-locking. Insulated with two-colour dual component handles. 1000V rated VDE-tested, IEC 60900, DIN EN 60900. Made in Germany. |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR COST |
Double Cable Shears
1000V Chrome Plated Red Dip |
8" |
KN9517-200 |
$83.68 |
$64.43 | |
|
Knipex® Wire Rope Cutters For Soft Wire & Small Bowden Cables with Maximum
Diameter 3mm
For Bowden cables and soft wire
rope up to 3mm Diameter. Smooth and clean cutting due to special
shape of the cutting edges. Sickle shaped cutting edges surround
the material and prevent the wire rope from fanning out. Little
hand force required due to very high transmission ratio. Includes
opening spring and locking lever. Cutting edges additionally induction
hardened. Made in Germany.
|
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR COST |
|
Soft Wire Rope Cutter |
6" |
KN9561-150 |
$31.76 |
$25.20 | |
|
Knipex® Wire Rope Cutter
For medium hard wire cables up to 6mm in diameter such as Bowden cords, but also for cables and round steel. Special blade geometry prevents wire cable splaying and allows for burr free cutting. Blade hardness of approx. 62HRc. Open spring and latch. |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR COST |
|
Wire Rope Cutter |
7 1/2" |
KN9561-190 |
$56.10 |
$43.40 | |
|
Knipex®
Shears for KEVLAR® Fibres
Only for cutting fibres of KEVLAR®
in optical fibre cables, not recommended for other materials.
Precision grinding with serration prevents the fibres from slipping and
guarantees a clean cut. Riveted precision joint, for low-friction
movement and smooth and even cutting of thin KEVLAR®
fibres. Hard-chrome plated, ground surface. Body of shears oil-hardened
and tempered. Made in Germany KEVLAR® is a registered trademark of
E.I. du Pont de Nemours and Company. |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR COST |
|
Shears for KEVLAR® |
6-1/4" |
KN9503-160 |
$66.80 |
$55.40 | |
|
Knipex®
Mitre Shears
For crush-free cutting of plastic, rubber and soft timber section; also
for ribbon cable up to 56mm width. Exchangeable cutting base with fence
angle for 45° cuts and markings for 60°-,75° and 90° cuts. Replaceable,
conventional trapezoidal blade. Includes opening spring and locking
device. Made in Germany.
Click for
more information |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR COST |
|
Mitre Shears |
8-1/2" |
KN9435-215 |
$92.44 |
$79.36 | |
Replacement
Cutting Blade |
|
KN9419-215 |
$16.06 |
$14.50 | |
|
Knipex®
Cutter for Ribbon Cables
For crush-free cutting of ribbon cable up to 56mm width.
Exchangeable cutting base with fence angle for rectangular cuts. Replaceable,
conventional trapezoidal blade. Includes opening spring and locking
device. Made in Germany.
Click for
more information |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR COST |
|
Cutter for Ribbon
Cables |
8-1/2" |
KN9415-215 |
$113.04 |
$89.70 | |
Replacement
Cutting Blade |
|
KN9419-215 |
$16.06 |
$14.50 | |
|
|