|
|
Knipex® High Leverage End Cutters
Cuts soft, hard and piano wire.
High cutting capacity with little effort due to optimum coordination of
cutting edge angle and transmission ratio. Cutting edges
additionally induction hardened, cutting edge hardness approx. 64 HRC.
Chrome Vanadium electric steel, oil hardened and tempered. Made in
Germany. |
| DESCRIPTION |
OVERALL
LENGTH |
PART# |
LIST |
YOUR
COST |
|
5-1/2" High Leverage End Cutter
Cuts 4mm Soft Copper Wire, 3.1mm Nails, 2mm Hard
Wire,1.5mm Piano Wire
|
5-1/2" |
KN6701-140 |
$42.14 |
$33.10 | |
|
6-1/4" High Leverage End Cutter
Cuts 4.5mm Soft Copper Wire, 3.4mm Nails, 2.5mm Hard
Wire,2mm Piano Wire
|
6-1/4" |
KN6701-160 |
$44.26 |
$34.30 | |
| 8" High Leverage End Cutter Cuts 5mm Soft Copper Wire, 3.8mm Nails, 3mm Hard
Wire,2.5mm Piano Wire |
8" |
KN6701-200 |
$54.98 |
$39.88 | |
|
Knipex® High Leverage End Cutters
With Comfort Grips and Chrome Plated
Cuts soft, hard and piano wire.
High cutting capacity with little effort due to optimum coordination of
cutting edge angle and transmission ratio. Cutting edges
additionally induction hardened, cutting edge hardness approx. 64 HRC.
Chrome Vanadium electric steel, oil hardened and tempered. Made in
Germany. |
| DESCRIPTION |
OVERALL
LENGTH |
PART# |
LIST |
YOUR
COST |
|
5-1/2" High Leverage End Cutter
cuts 4mm Soft Copper Wire, 3.1mm Nails, 2mm Hard
Wire,1.5mm Piano Wire
|
5-1/2" |
KN6705-140 |
$54.67 |
$39.30 | |
|
6-1/4" High Leverage End Cutter
cuts 4.5mm Soft Copper Wire, 3.4mm Nails, 2.5mm Hard
Wire,2mm Piano Wire
|
6-1/4" |
KN6705-160 |
$56.77 |
$42.10 | |
|
8" High Leverage End Cutter cuts 5mm Soft Copper Wire,
3.8mm Nails, 3mm Hard
Wire,2.5mm Piano Wire |
8" |
KN6705-200 |
$70.80 |
$49.40 | |
|
Knipex® End Cutting Nippers
With cutting edges for soft and
hard wire. Suitable for twisting and cutting binding wire. Also suitable
for wire netting in reinforced concrete construction. Cutting edges
additionally induction hardened, cutting edge hardness approx. 61HRc.
High grade special tool steel, oil-hardened and tempered. Made in
Germany |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
|
6-1/4" End Cutting
Nippers cuts 4mm Soft wire, 2.8mm Nails, 2.3mm Hard Wire |
6-1/4" |
KN6801-160 |
$22.38 |
$17.79 | |
|
7" End Cutting
Nippers cuts 4mm Soft Wire, 3.2mm Nails, 2.5mm Hard Wire |
7" |
KN6801-180 |
$26.66 |
$21.10 | |
| 8" End Cutting
Nippers cuts 4mm Soft Wire, 3.5mm Nails, 2.8mm Hard Wire |
8" |
KN6801-200 |
$33.56 |
$24.67 | |
|
Knipex® Bolt End Cutting Nippers
Better handling, greater capacity
and lower handforce required compared to conventional bolt end cutting
nippers. Cuts bolts, nails, rivets, piano wire
and soft wire. Particular high cutting capacity with minimum effort due
to optimum transmission ratio. Vanadium electric oil hardened steel and
inductive hardened edges provide 64HRc edge hardness. Cuts 1mm to
6mm Soft Wire, 4mm Nails and Medium Hard Wire, 3.5mm Hard Wire and 3mm Piano
Wire. Made in Germany |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
| 8" Bolt End Cutters |
8" |
KN6101-200 |
$78.30 |
$49.40 | |
|
Knipex®
Mechanics End Cutting Nippers
For
cutting soft, hard and piano wire; also suitable for thin copper wires.
Cutting edges additionally induction hardened, cutting edge hardness
approx. 64 HRC. Chrome Vanadium electric steel, oil-hardened and
tempered. Cuts .4mm to 2mm Soft Wire, 1.3mm Nails and Medium Hard
Wire, 1mm Hard Wire and .75mm Piano Wire. Made in Germany |
| DESCRIPTION |
OVERALL
LENGTH |
PART# |
LIST |
YOUR
COST |
|
5-1/4"
Mechanics End Cutting
Nippers |
5-1/4" |
KN6901-130 |
$44.76 |
$33.79 | |
|
Knipex®
Electronics End Cutters
with bevel
Precision pliers for ultra fine
cutting work, e.g. in electronics and fine mechanics. Precision
box joint. Low-friction double spring for gentle and even opening.
Cutting edge hardness at least 56 HRC. Special tool steel,
oil-hardened and tempered. Cuts 2mm Soft Wire, 1mm Nails and
Medium Hard Wire and .6mm Hard Wire. Made in
Germany. No longer Available see
KN6402-115 |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
|
4-1/2"
Electronics End Cutting
Nippers |
4-1/2" |
KN6401-115 |
$43.95 |
$39.10 | |
|
Knipex Comfort®
Electronics End Cutters
with bevel
Precision pliers for ultra fine
cutting work, e.g. in electronics and fine mechanics. Precision
box joint. Low-friction double spring for gentle and even opening.
Cutting edge hardness at least 56 HRC. Special tool steel,
oil-hardened and tempered. Cuts 2mm Soft Wire, 1mm Nails and
Medium Hard Wire and .6mm Hard Wire. Made in
Germany |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
|
4-1/2"
Electronics End Cutting
Nippers |
4-1/2" |
KN6402-115 |
$67.70 |
$47.34 | |
|
Knipex Comfort®
Electronics End Cutters
with small bevel
Precision pliers for ultra fine
cutting work, e.g. in electronics and fine mechanics. Precision
box joint. Low-friction double spring for gentle and even opening.
Cutting edge hardness at least 56 HRC. Special tool steel,
oil-hardened and tempered. Cuts 2mm Soft Wire, 1mm Nails and
Medium Hard Wire and .6mm Hard Wire. Made in
Germany |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
|
4-1/2"
Electronics End Cutting
Nippers |
4-1/2" |
KN6412-115 |
$68.08 |
$47.60 | |
|
Knipex® ESD
Electronics End Cutters
with small bevel ESD
Precision pliers for ultra fine
cutting work, e.g. in electronics and fine mechanics. Precision
box joint. Low-friction double spring for gentle and even opening.
Cutting edge hardness at least 56 HRC. Special tool steel,
oil-hardened and tempered. Cuts 2mm Soft Wire, 1mm Nails and
Medium Hard Wire and .6mm Hard Wire. Made in
Germany |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
4-1/2"
Electronics End Cutting
Nippers
ESD |
4-1/2" |
KN6412-115ESD |
$69.52 |
$49.40 | |
|
Knipex Comfort®
Electronics Transverse End Cutters with small bevel
Precision pliers for ultra fine
cutting work, e.g. in electronics and fine mechanics. Precision
box joint. Low-friction double spring for gentle and even opening.
Cutting edge hardness at least 56 HRC. Special tool steel,
oil-hardened and tempered. Cuts .8mm Soft Wire.
Made in
Germany |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
|
4-1/2"
Electronics Transverse End Cutters |
4-1/2" |
KN6422-115 |
$69.02 |
$48.26 | |
|
Knipex Comfort®
Oblique End Cutters 15° with small bevel
Precision pliers for ultra fine
cutting work, e.g. in electronics and fine mechanics. Precision
box joint. Low-friction double spring for gentle and even opening.
Cutting edge hardness at least 56 HRC. Special tool steel,
oil-hardened and tempered. Cuts 1.5mm Soft Wire, 1mm Nails and
Medium Hard Wire and .5mm Hard Wire. Made in
Germany |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
|
4-3/4"
Electronics Oblique End Cutter |
4-3/4" |
KN6432-120 |
$72.86 |
$51.10 | |
|
Knipex® ESD
Oblique End Cutters 15° with small bevel ESD
Precision pliers for ultra fine
cutting work, e.g. in electronics and fine mechanics. Precision
box joint. Low-friction double spring for gentle and even opening.
Cutting edge hardness at least 56 HRC. Special tool steel,
oil-hardened and tempered. Cuts 1.5mm Soft Wire, 1mm Nails and
Medium Hard Wire and .5mm Hard Wire. Made in
Germany |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
4-3/4"
Electronics Oblique End Cutter
ESD |
4-3/4" |
KN6432-120ESD |
$76.78 |
$55.10 | |
|
Knipex Comfort®
Oblique End Cutters 27° with small bevel
Precision pliers for ultra fine
cutting work, e.g. in electronics and fine mechanics. Precision
box joint. Low-friction double spring for gentle and even opening.
Cutting edge hardness at least 56 HRC. Special tool steel,
oil-hardened and tempered. Cuts 1.5mm Soft Wire, 1mm Nails and
Medium Hard Wire and .5mm Hard Wire. Made in
Germany |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
|
4-1/2"
Electronics Oblique End Cutters |
4-1/2" |
KN6442-115 |
$71.50 |
$49.10 | |
|
Knipex Comfort®
Oblique End Cutters 27° without bevel (Flush Cutting)
Precision pliers for ultra fine
cutting work, e.g. in electronics and fine mechanics. Precision
box joint. Low-friction double spring for gentle and even opening.
Cutting edge hardness at least 56 HRC. Special tool steel,
oil-hardened and tempered. Cuts 1.3mm Soft Wire.
Made in
Germany |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
|
4-1/2"
Electronics Oblique End Cutters |
4-1/2" |
KN6452-115 |
$75.44 |
$52.69 | |
|
Knipex Comfort®
Oblique End Cutters 65°
Mini-Blade with small bevel
Precision pliers for ultra fine
cutting work, e.g. in electronics and fine mechanics. Precision
box joint. Low-friction double spring for gentle and even opening.
Cutting edge hardness at least 56 HRC. Special tool steel,
oil-hardened and tempered. Cuts .6mm Soft Wire.
Made in
Germany |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
|
4-3/4"
Electronics Oblique End Cutters Mini-Blade |
4-3/4" |
KN6462-120 |
$74.03 |
$51.77 | |
|
Knipex® ESD
Oblique End Cutters 65°
Mini-Blade with small bevel
Precision pliers for ultra fine
cutting work, e.g. in electronics and fine mechanics. Precision
box joint. Low-friction double spring for gentle and even opening.
Cutting edge hardness at least 56 HRC. Special tool steel,
oil-hardened and tempered. Cuts .6mm Soft Wire.
Made in
Germany |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
|
4-3/4"
Electronics Oblique End Cutters Mini-Blade |
4-3/4" |
KN6462-120ESD |
$76.78 |
$55.10 | |
|
Knipex Comfort®
Oblique End Cutters 35°
Mini-Blade with small bevel
Precision pliers for ultra fine
cutting work, e.g. in electronics and fine mechanics. Precision
box joint. Low-friction double spring for gentle and even opening.
Cutting edge hardness at least 56 HRC. Special tool steel,
oil-hardened and tempered. Cuts 1.5mm Soft Wire.
Made in
Germany |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
|
4-1/2"
Electronics Oblique End Cutters Mini-Blade |
4-3/4" |
KN6472-120 |
$79.75 |
$56.30 | |
|
|
