| Sargent 2100 Series Crimp Tool Frames and Die Sets |
| Model # | Description | List | Each | To Order |
| 2100 | Sargent 2100 Crimp Tool Frame
This compact design provides a new level of efficiency and convenience when terminating small to medium size wire or cable. The same level of quality and performance built into the 4100 Series, is also provided in the 2100 Series. The state side manufactured, fine blank high carbon steel construction, provides the accuracy and longevity expected of a durable commercial grade crimping tools.
| $70.00 | $55.50 |
|
| 2100-06 | Sargent 2100-06 Die Set
RJ11 2,4,6 pos 1 piece | $45.00 | $35.50 |
|
| 2100-06LB | Sargent 2100-06LB Die Set
RJ11 Long Body 1 piece (Long Body 6 Position AMP and Western Electric) | $45.00 | $35.50 |
|
| 2100-08 | Sargent 2100-08 Die Set
RJ45 8 pos 1 piece | $45.00 | $35.50 |
|
| 2100-10 | Sargent 2100-10 Die Set
RJ45 10 pos 1 piece | $45.00 | $35.50 |
|
| 2100-27 | Sargent 2100-27 Die Set
Rs232 18-30AWG (with positioner) | $60.00 | $37.10 |
DISCONTINUED
|
| 2100-51 | Sargent 2100-51 Die Set
RG-58/59/62 Coax PVC (.068",.213", .255") | $45.00 | $35.50 |
|
| 2100-54 | Sargent 2100-54 Die Set
RG-58/59/62 Coax Plenum (.042",.068", .190", .213") | $45.00 | $35.50 |
|
| 2100-64 | Sargent 2100-64 Die Set
RG-59/8281 Coax (.068",.255", .324") | $45.00 | $35.50 |
|
| 2100-52 | Sargent 2100-52 Die Set
RG-174/8281 Coax (.068",.178", .324") | $45.00 | $35.50 |
|
| Sargent 4100 & 4200 Series Crimp Tool Frames and Die Sets |
| Model # | Description | List | Each | To Order |
| 4100 | Sargent 4100 Crimp Tool Frame
Super Crimp is designed for the professional that insists on the best commercial grade full cycle crimp tool available. The ergonomic progressive pivoting design provides maximum crimping force with reasonable handle pressure. Fine blanked, high carbon steel construction provides a level of accuracy and performance usually reserved for MIL-SPEC tools. The 4100 series is state-side manufactured and are backed by over 100 years of quality craftsmanship.
| $70.00 | $55.50 |
|
| 4200 | Sargent 4200 Crimp Tool Frame
The super Ergo tools are designed to reduce hand stress. The progressive pivoting action coupled with easy reach cushion grip facilitates productivity. Mechanical advantage is optimized to reduce hand pressure while maintaining proper hand grasp ratios. Fine blanked, high carbon steel construction provides the highest level of accuracy and performance available within the industry. These tools are state-side manufactured and are backed by over 100 years of quality craftsmanship.
| $90.00 | $69.50 |
|
| Die Sets For 4100/4200 Series |
| 4100-06 | Sargent 4100-06 Die Set
RJ11 2,4,6 pos 1 piece | $45.00 | $35.50 |
DISCONTINUED
|
| 4100-06LB | Sargent 4100-06LB Die Set
RJ11 Long Body 1 piece (Long Body 6 Position AMP and Western Electric) | $45.00 | $35.50 |
|
| 4100-08 | Sargent 4100-08 Die Set
RJ45 8 pos 1 piece | $45.00 | $35.50 |
DISCONTINUED
|
| 4100-20 | Sargent 4100-20 Die Set
Insulated Terminals 18-22AWG (Crimps Conductor only Red 16-22, Blue 14-16, Yellow 10-12) | $45.00 | $35.50 |
|
| 4100-30 | Sargent 4100-30 Die Set
Crimps a wide variety of open barrel contacts in medium to large size wires in one tool closure. Crimps are B Type and are produced in 3 cavities A 22-18 AWG, B 16-14 AWG, and C 12-10 AWG | $60.00 | $50.00 |
DISCONTINUED
|
| 4100-40 | Sargent 4100-40 Die Set
Insulated Terminals 18-22AWG (Crimps Conductor & Strain Relief Red 16-22, Blue 14-16, Yellow 10-12) | $45.00 | $35.50 |
|
| 4100-41 | Sargent 4100-41 Die Set
Crimps conductor and strain relief portion of insulated slide on terminals in one tool closure. Crimps are produced in two cavities: Red 22-16 AWG, Blue 16-14 AWG | $45.00 | $35.50 |
DISCONTINUED
|
| 4100-66 | Sargent 4100-66 Die Set
RG-58/59/62 Coax (.042",.68", .213", .255") | $45.00 | $35.50 |
DISCONTINUED
|
| 4100-69 | Sargent 4100-69 Die Set
RG-8 Coax (.068", .80", .100", .429") | $45.00 | $35.50 |
DISCONTINUED
|
| 4100-72 | Sargent 4100-72 Die Set
RG-58/6 CATV Coax (.324",.360") | $45.00 | $35.50 |
|
